RM-CG Ceiling Array Microphone

Dimensions W560 mm × D560 mm × H90 mm (Includes protrusion/microphone panel: 22 mm)
Weight 5.6 kg
Power Requirements PoE (IEEE 802.3af)
Maximum Power Consumption 7.2 W
Connector RJ45
In Operation Temperature 0°C - 40°C
Humidity 30% - 90% (no condensation)
Storage Temperature -20°C - 60°C
Humidity 20% - 90% (no condensation)
Indicator Front Indicator (Mute/Unmute & Status), Network Port Indicator
Mount Ceiling mount, Wire mount, VESA mount
Maximum Device Number with RM-CR 14 (without VXL1-16P, up to 16)
Accessories Construction description, (Guarantee), Grille x 1, Screws for grille (M3 x 8 mm) x 5*, Screw cover x 4, Cutting template x 1, C ring x 1, Screws for C ring x 2, Hanger angle x 1, Screws for hanger angle (M4 x 20 mm) x 5*, Terminal Cover x 1, Safety wire x 1, Binding band x 1, Clamp plate x 2 *Including a spare respectively
Dust Protection IP5X for dust protection (with terminal cover)
Plenum Rating UL2043 (with terminal cover)
Ether1 Dante, Remote Control, WebUI, PoE
Cable Requirements Cat 5e or higher (STP)
Audio I/O Dante 1in/2out, In1=AEC reference signal / Out1=output of beam mix, Out2=output of beam mix (simple processed)
Sampling Rate 48 kHz
Bit Depth 24 bit
Latency 58 ms (including signal processing), 22 ms (low-latency mode)
Frequency Response 160 Hz – 16 kHz (-10 dB)
Maximum Input Level of SPL (0dBFS) 117.8 dB SPL
Self Noise -0.8 dBA SPL
SN Ratio (Ref. 94 dB SPL at 1 kHz) 94.8 dBA
Sensitivity -23.8 dBFS/Pa
Dynamic Range 118.6 dBA
Signal Processing Multi Beam Tracking, Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain Adjustment

External View

Frequency Response

Polar Pattern