MG Series

Where to buy

		MG20XU	MG16XU	MG16X	MG12XU	MG12XUK	MG12X	MG10XU	MG10XUF	MG10X	MG06X
Outline
Mixing capability	On-board processors	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)	SPX algorithm: 6 programs
I/O	Phantom power	+48 V	+48 V	+48 V	+48 V	+48 V	+48 V	+48 V	+48 V	+48 V	+48 V
I/O	Digital I/O	USB Audio Class 2.0 compliant Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit	USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit	-	USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit	USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit	-	USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit	USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit	-	-
Input Channels	Mono[MIC/LINE]	12	8	8	4	6	4	4	4	4	2
	Mono/Stereo[MIC/LINE]	4	2	2	2	-	2	-	-	-	-
	Stereo[LINE]	-	2	2	2	3	2	3	3	3	2
Output Channels	STEREO OUT	2	2	2	2	2	2	2	2	2	2
	MONITOR OUT	1	1	1	1	1	1	1	1	1	-
	PHONES	1	1	1	1	1	1	1	1	1	1
	AUX SEND	4	4	4	2	1	2	1	1	1	-
	GROUP OUT	4	4	4	2	-	2	-	-	-	-
Bus		Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)	Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)	Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)	Stereo: 1, GROUP: 2, AUX: 2 (incl. FX)	Stereo: 1, AUX[FX]: 1	Stereo: 1, GROUP: 2, AUX: 2 (incl. FX)	Stereo: 1, AUX[FX]: 1	Stereo: 1, AUX[FX]: 1	Stereo: 1, AUX[FX]: 1	Stereo: 1
Input Channel Function	PAD	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)
	HPF	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono)	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono)	80 Hz, 12 dB/oct (Mono)	80 Hz, 12 dB/oct (Mono)	80 Hz, 12 dB/oct (Mono)
	COMP	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec	-
	EQ HIGH	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	(Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
	EQ MID	Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking	-
	EQ LOW	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	(Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
	PEAK LED	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping
	Level Meter	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]	2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]	2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]	2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]	2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]	2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]
General specifications
Total harmonic distortion		0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min	0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min	0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min	0.01 % @ +8dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +18dBu (1kHz), GAIN knob: Min
Frequency response		+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level	Equivalent input noise	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Hum & noise level	Residual output noise	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)	-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk		-78 dB	-78 dB	-78 dB	-78 dB	-83 dB	-78 dB	-83 dB	-83 dB	-83 dB	-88 dB
Power requirements		AC 100 – 240 V, 50 / 60 Hz	AC 100 – 240 V, 50 / 60 Hz	AC 100 – 240 V, 50 / 60 Hz	AC 100 – 240 V, 50 / 60 Hz	PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha	AC 100 – 240 V, 50 / 60 Hz	PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha	PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha	PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha	PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha
Power consumption		36 W	30 W	30 W	22 W	22.9 W	22 W	22.9 W	22.9 W	22.9 W	12 W
Dimensions	W	444 mm (17.5")	444 mm (17.5")	444 mm (17.5")	308 mm (12.1")	315 mm (12.4")	308 mm (12.1")	244 mm (9.6")	275 mm (10.8")	244 mm (9.6")	149 mm (5.9")
	H	130 mm (5.1")	130 mm (5.1")	130 mm (5.1")	118 mm (4.6")	91 mm (3.6")	118 mm (4.6")	71 mm (2.8")	110 mm (4.3")	71 mm (2.8")	62 mm (2.4")
	D	500mm (19.7")	500 mm (19.7")	500 mm (19.7")	422 mm (16.6")	297mm (11.7")	422 mm (16.6")	294 mm (11.6")	390 mm (15.4")	294 mm (11.6")	202 mm (7.9")
Net weight		7.1kg (15.7 lbs.)	6.8 kg (15.0 lbs.)	6.8 kg (15.0 lbs.)	4.2 kg (9.3 lbs.)	3.0kg(6.62 lbs)	4.2 kg (9.3 lbs.)	2.1 kg (4.63 lbs.)	3.3 kg (7.3 lbs)	2.1 kg (4.63 lbs.)	0.9 kg (1.98 lbs.)
Accessories		Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Rack-mount kit, Optional Accessory: Foot Switch FC5	Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Rack-mount kit, Optional Accessory: Foot Switch FC5	Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit, Optional Accessory: Foot Switch FC5	Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5	Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Foot Switch FC5	Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5	Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A, Foot Switch FC5	Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Foot Switch FC5	Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A, Foot Switch FC5	Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A
Others		Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C

0 dBu = 0.775 Vrms Output impedance of signal generator (Rs) = 150Ω
All level controls are nominal if not specified.
Hum & noise level: Noise is measured with A-weighting filter.
Crosstalk： Measured with 1 kHz band pass filter.

		MG20	MG16	MG12	MG10	MG06
Outline
I/O	Phantom power	+48V	+48 V	+48 V	+48 V	+48 V
Input Channels	Mono[MIC/LINE]	12	8	4	4	2
	Mono/Stereo[MIC/LINE]	4	2	2	-	-
	Stereo[LINE]	-	2	2	3	2
Output Channels	STEREO OUT	2	2	2	2	2
	MONITOR OUT	1	1	1	1	-
	PHONES	1	1	1	1	1
	AUX SEND	4	4	2	1	-
	GROUP OUT	4	4	2	-	-
Bus		Stereo: 1, GROUP: 4, AUX: 4	Stereo: 1, GROUP: 4, AUX: 4	Stereo: 1, GROUP: 2, AUX: 2	Stereo: 1, AUX: 1	Stereo: 1
Input Channel Function	PAD	26 dB(Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)	26 dB (Mono)
	HPF	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)	80 Hz, 12 dB/oct (Mono)	80 Hz, 12 dB/oct (Mono)
	COMP	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec	1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec	-
	EQ HIGH	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving	(Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
	EQ MID	Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking	Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking	-
	EQ LOW	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving	(Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
	PEAK LED	LED turns on when post EQ signal reaches 3 dB below clipping(Mono)	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping	LED turns on when post EQ signal reaches 3 dB below clipping
	Level Meter	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]	-	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]	2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]	2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]
General specifications
Total harmonic distortion		0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min	0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min	0.01 % @ +8dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +18dBu (1kHz), GAIN knob: Min
Frequency response		+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min	+0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level	Equivalent input noise	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Hum & noise level	Residual output noise	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO master fader: Min)	-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)	-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk		-78 dB	-78 dB	-78 dB	-83 dB	-88 dB
Power requirements		AC 100 – 240 V, 50 / 60 Hz	AC 100 – 240 V, 50 / 60 Hz	AC 100 – 240 V, 50 / 60 Hz	PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha	PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha
Power consumption		36 W	30 W	22 W	22.9 W	12 W
Dimensions	W	444 mm (17.5")	444 mm (17.5")	308 mm (12.1")	244 mm (9.6")	149 mm (5.9")
	H	130 mm (5.1")	130 mm (5.1")	118 mm (4.6")	71 mm (2.8")	62 mm (2.4")
	D	500 mm (19.7")	500 mm (19.7")	422 mm (16.6")	294 mm (11.6")	202 mm (7.9")
Net weight		6.9kg (15.2 lbs.)	6.6 kg (14.6 lbs.)	4.0 kg (8.8 lbs.)	1.9 kg (4.19 lbs.)	0.9 kg (1.98 lbs.)
Accessories		Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit	Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit	Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Optional Accessory: Rack-mount kit RK-MG12	Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A	Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A
Others		Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C	Operating Temperature: 0 to +40˚C

0 dBu = 0.775 Vrms Output impedance of signal generator (Rs) = 150Ω
All level controls are nominal if not specified.
Hum & noise level: Noise is measured with A-weighting filter.
Crosstalk： Measured with 1 kHz band pass filter.

MG20XU/20 Analog Input Characteristics

Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Input Level			Connector
Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MIC/LINE 1 – 12	OFF	+64 dB	3kΩ	50-600Ω Mics/Lines	-80 dBu (0.077 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	Combo jack ^*2 (Balanced)
	OFF	+20 dB			-36 dBu (12. 3 mV)	-16 dBu (122.8 mV)	+4 dBu (1.228 V)
	ON	+38 dB			-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)
	ON	-6 dB			-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)
MIC 13/14 – 19/20	-	+64 dB	3kΩ	50-600Ω Mic	-80 dBu (0.077 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	XLR-3-31 ^*3 (Balanced)
MIC 13/14 – 19/20	-	+20 dB	3kΩ	50-600Ω Mic	-36 dBu (12. 3 mV)	-16 dBu (122.8 mV)	-6 dBu (388.2mV)	XLR-3-31 ^*3 (Balanced)
LINE 13/14 – 15/16	-	+38 dB	10kΩ	600Ω Lines	-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)	Phone jack ^*5 (Unbalanced)
LINE 13/14 – 15/16	-	-6 dB	10kΩ	600Ω Lines	-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)	Phone jack ^*5 (Unbalanced)
LINE 17/18 – 19/20	-	+38 dB	10kΩ	600Ω Lines	-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)	RCA Pin (Unbalanced)
LINE 17/18 – 19/20	-	-6 dB	10kΩ	600Ω Lines	-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)	RCA Pin (Unbalanced)

MG20XU/20 Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
STEREO OUT [L, R]	75Ω	600Ω Lines	+4 dBu (1.228 V)	+24 dBu (12.28 V)	XLR-3-32 ^3 Phone jack ^4 (Balanced)
MONITOR OUT [L, R] GROUP OUT [1 - 4] AUX SEND [1 - 4]	150Ω	10kΩ Lines	+4 dBu (1.228 V)	+20 dBu (7.750 V)	Phone jack ^*4 (Impedance Balanced)
PHONES	110Ω	40Ω Phones	3mW + 3mW	100mW + 100mW	Stereo phone jack

MG16XU/16X/16 Analog Input Characteristics

Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Input Level			Connector
Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MIC/LINE 1 – 8	OFF	+64 dB	3kΩ	50-600Ω Mics/Lines	-80 dBu (0.077 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	Combo jack ^*2 (Balanced)
	OFF	+20 dB			-36 dBu (12. 3 mV)	-16 dBu (122.8 mV)	+4 dBu (1.228 V)
	ON	+38 dB			-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)
	ON	-6 dB			-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)
MIC 9/10, 11/12	-	+64 dB	3kΩ	50-600Ω Mic	-80 dBu (0.077 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	XLR-3-31 ^*3 (Balanced)
MIC 9/10, 11/12	-	+20 dB	3kΩ	50-600Ω Mic	-36 dBu (12. 3 mV)	-16 dBu (122.8 mV)	-6 dBu (388.2mV)	XLR-3-31 ^*3 (Balanced)
LINE 9/10, 11/12	-	+38 dB	10kΩ	600Ω Lines	-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)	Phone jack ^*5 (Unbalanced)
LINE 9/10, 11/12	-	-6 dB	10kΩ	600Ω Lines	-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)	Phone jack ^*5 (Unbalanced)
LINE 13/14 – 15/16	-	-	10kΩ	600Ω Lines	-30 dBu (24.5 mV)	-10 dBu (245 mV)	+10 dBu (2.45 V)	Phone jack ^*5 RCA Pin (Unbalanced)

MG16XU/16X/16 Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
STEREO OUT [L, R]	75Ω	600Ω Lines	+4 dBu (1.228 V)	+24 dBu (12.28 V)	XLR-3-32 ^3 Phone jack ^4 (Balanced)
MONITOR OUT [L, R] GROUP OUT [1 - 4] AUX SEND [1 - 4]	150Ω	10kΩ Lines	+4 dBu (1.228 V)	+20 dBu (7.750 V)	Phone jack ^*4 (Impedance Balanced)
PHONES	110Ω	40Ω Phones	3mW + 3mW	100mW + 100mW	Stereo phone jack

MG12XU/12X/12 Analog Input Characteristics

Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Input Level			Connector
Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MIC/LINE 1 – 4	OFF	+64 dB	3kΩ	50-600Ω Mics/Lines	-80 dBu (0.077 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	Combo jack ^*2 (Balanced)
	OFF	+20 dB			-36 dBu (12. 3 mV)	-16 dBu (122.8 mV)	+4 dBu (1.228 V)
	ON	+38 dB			-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)
	ON	-6 dB			-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)
MIC 5/6, 7/8	-	+64 dB	3kΩ	50-600Ω Mic	-80 dBu (0.077 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	XLR-3-31 ^*3 (Balanced)
MIC 5/6, 7/8	-	+20 dB	3kΩ	50-600Ω Mic	-36 dBu (12.3 mV)	-16 dBu (122.8 mV)	-6 dBu (388.2 mV)	XLR-3-31 ^*3 (Balanced)
LINE 5/6, 7/8	-	+38 dB	10kΩ	600Ω Lines	-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)	Phone jack ^*5 (Unbalanced)
LINE 5/6, 7/8	-	-6 dB	10kΩ	600Ω Lines	-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)	Phone jack ^*5 (Unbalanced)
LINE 9/10	-	-	10kΩ	600Ω Lines	-30 dBu (24.5 mV)	-10 dBu (245 mV)	+10 dBu (2.45 V)	Phone jack ^*5 RCA Pin (Unbalanced)

MG12XU/12X/12 Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
STEREO OUT [L, R]	75Ω	600Ω Lines	+4 dBu (1.228 V)	+24 dBu (12.28 V)	XLR-3-32 ^3 Phone jack ^4 (Balanced)
MONITOR OUT [L, R] GROUP OUT [1, 2] AUX SEND [1, 2]	150Ω	10kΩ Lines	+4 dBu (1.228 V)	+20 dBu (7.750 V)	Phone jack ^*4 (Impedance Balanced)
PHONES	110Ω	40Ω Phones	3mW + 3mW	100mW + 100mW	Stereo phone jack

MG12XUK Analog Input Characteristics

Input Jacks	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Input Level			Connector
Input Jacks	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MIC/LINE 1 – 6	OFF	+64 dB	3kΩ	50-600Ω Mics/Lines	-72 dBu (0.195 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	Combo jack ^*2 (Balanced)
	OFF	+20 dB			-28 dBu (30.9 mV)	-16 dBu (122.8 mV)	+4 dBu (1.228 V)
	ON	+38 dB			-46 dBu (3.884 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)
	ON	-6 dB			-2 dBu (615.6 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)
LINE 7/8, 9/10	-	-	10kΩ	600Ω Lines	-22 dBu (61.56 mV)	-10 dBu (245.1 mV)	+10 dBu (2.451 V)	Phone jack ^*5 RCA Pin (Unbalanced)
LINE 11/12	-	-	10kΩ	600Ω Lines	-22 dBu (61.56 mV)	-10 dBu (245.1 mV)	+10 dBu (2.451 V)	Phone jack ^*5 (Unbalanced)

MG12XUK Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
STEREO OUT [L, R]	75Ω	600Ω Lines	+4 dBu (1.228 V)	+24 dBu (12.28 V)	XLR-3-32 ^3 Phone jack ^4 (Balanced)
MONITOR OUT [L, R] FX SEND	150Ω	10kΩ Lines	+4 dBu (1.228 V)	+20 dBu (7.750 V)	Phone jack ^*4 (Impedance Balanced)
PHONES	110Ω	40Ω Phones	3 mW + 3 mW	100 mW + 100 mW	Stereo phone jack

MG10XU/10X/10 Analog Input Characteristics

Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Input Level			Connector
Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MIC/LINE 1 – 4	OFF	+64 dB	3kΩ	50-600Ω Mics/Lines	-72 dBu (0.195 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	Combo jack ^*2 (Balanced)
	OFF	+20 dB			-28 dBu (30.9 mV)	-16 dBu (122.8 mV)	+4 dBu (1.228 V)
	ON	+38 dB			-46 dBu (3.884 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)
	ON	-6 dB			-2 dBu (615.6 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)
LINE 5/6, 7/8	-	-	10kΩ	600Ω Lines	-22 dBu (61.56 mV)	-10 dBu (245.1 mV)	+10 dBu (2.451 V)	Phone jack ^*5 RCA Pin (Unbalanced)
LINE 9/10	-	-	10kΩ	600Ω Lines	-22 dBu (61.56 mV)	-10 dBu (245.1 mV)	+10 dBu (2.451 V)	Phone jack ^*5 (Unbalanced)

MG10XU/10X/10 Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
STEREO OUT [L, R]	75Ω	600Ω Lines	+4 dBu (1.228 V)	+24 dBu (12.28 V)	XLR-3-32 ^3 Phone jack ^4 (Balanced)
MONITOR OUT [L, R] AUX[FX] SEND	150Ω	10kΩ Lines	+4 dBu (1.228 V)	+20 dBu (7.750 V)	Phone jack ^*4 (Impedance Balanced)
PHONES	110Ω	40Ω Phones	3mW + 3mW	100mW + 100mW	Stereo phone jack

MG10XUF Analog Input Characteristics

Input Jacks	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Input Level			Connector
Input Jacks	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MIC/LINE 1 – 4	OFF	+64 dB	3kΩ	50-600Ω Mics/Lines	-80 dBu (0.077 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	Combo jack ^*2 (Balanced)
	OFF	+20 dB			-36 dBu (12.3 mV)	-16 dBu (122.8 mV)	+4 dBu (1.228 V)
	ON	+38 dB			-54 dBu (1.55 mV)	-34 dBu (15.46 mV)	-14 dBu (154.6 mV)
	ON	-6 dB			-10 dBu (245 mV)	+10 dBu (2.451 V)	+30 dBu (24.51 V)
LINE 5/6, 7/8	-	-	10kΩ	600Ω Lines	-30 dBu (24.5 mV)	-10 dBu (245 mV)	+10 dBu (2.45 V)	Phone jack ^*5 RCA Pin (Unbalanced)
LINE 9/10	-	-	10kΩ	600Ω Lines	-30 dBu (24.5 mV)	-10 dBu (245 mV)	+10 dBu (2.45 V)	Phone jack ^*5 (Unbalanced)

MG10XUF Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
STEREO OUT [L, R]	75Ω	600Ω Lines	+4 dBu (1.228 V)	+24 dBu (12.28 V)	XLR-3-32 ^3 Phone jack ^4 (Balanced)
MONITOR OUT [L, R] FX SEND	150Ω	10kΩ Lines	+4 dBu (1.228 V)	+20 dBu (7.750 V)	Phone jack ^*4 (Impedance Balanced)
PHONES	110Ω	40Ω Phones	3 mW + 3 mW	100 mW + 100 mW	Stereo phone jack

MG06X/06 Analog Input Characteristics

Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Input Level			Connector
Input Terminals	PAD 26 dB	GAIN Trim Position	Actual Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MIC/LINE 1/L, 2/R	OFF	+64 dB	3kΩ	50-600Ω Mics/Lines	-72 dBu (0.195 mV)	-60 dBu (0.775 mV)	-46 dBu (3.884 mV)	Combo jack ^*2 (Balanced)
	OFF	+20 dB			-28 dBu (30.9 mV)	-16 dBu (122.8 mV)	-2 dBu (615.6 mV)
	ON	+38 dB			-46 dBu (3.884 mV)	-34 dBu (15.46 mV)	-20 dBu (77.5 mV)
	ON	-6 dB			-2 dBu (615.6 mV)	+10 dBu (2.451 V)	+24 dBu (12.283 V)
LINE 3/4, 5/6	-	-	10kΩ	600Ω Lines	-22 dBu (61.56 mV)	-10 dBu (245.1 mV)	+4 dBu (1.228 V)	Phone jack ^*5 RCA Pin (Unbalanced)

MG06X/06 Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
STEREO OUT [L, R]	75Ω	10kΩ Lines	+4 dBu (1.228 V)	+18 dBu (6.156 V)	XLR-3-32 ^3 Phone jack ^4 (Balanced)
PHONES	33Ω	40Ω Phones	2.4mW + 2.4mW	24mW + 24mW	Stereo phone jack

Digital Input / Output Characteristics (XU Models)

Output Terminals	Format	Data Length	Fs	Connector
USB	USB Audio Class 2.0	16 / 24bit	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4kHz, 192 kHz	USB Standard-B

0dBu is referenced to 0.775Vrms.
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.228V) or the nominal output level when the unit is set to maximum gain. (All level controls are maximum position.)
*2. 1&Sleeve = GND, 2&Tip = HOT, 3&Ring = COLD
*3. 1 = GND, 2 = HOT, 3 = COLD
*4. Tip = HOT, Ring = COLD, Sleeve = GND
*5. Tip = Signal, Sleeve = GND