DME Satellite Digital Mixing Engine Satellite Discontinued

		DME8i-C	DME8o-C	DME4io-C	DME8i-ES	DME8o-ES	DME4io-ES
Outline
I/O	Mic inputs	8 (Remote HA)	-	4 (Remote HA)	8 (Remote HA)	-	4 (Remote HA)
	Phantom power	+48V DC; ON/OFF: per channel	-	+48V DC; ON/OFF: per channel	+48V DC; ON/OFF: per channel	-	+48V DC; ON/OFF: per channel
	AD converter	24-bit; 128-time over sampling	-	24-bit; 128-time over sampling	24-bit; 128-time over sampling	-	24-bit; 128-time over sampling
	Digital I/O	CobraNet (16-in/16-out)	CobraNet (16-in/16-out)	CobraNet (16-in/16-out)	EtherSound (16-in/16-out)	EtherSound (16-in/16-out)	EtherSound (16-in/16-out)
	Line outputs	-	8	4	-	8	4
	DA converter	-	24-bit; 128-time over sampling	24-bit; 128-time over sampling	-	24-bit; 128-time over sampling	24-bit; 128-time over sampling
General specifications
Internal processing		32bit	32bit	32bit	32bit	32bit	32bit
Sampling frequency rate	External	48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer)	48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer)	48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer)	44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)	44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)	44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)
Sampling frequency rate	Internal	-	-	-	48kHz (±50ppm), 96kHz (±50ppm)	48kHz (±50ppm), 96kHz (±50ppm)	48kHz (±50ppm), 96kHz (±50ppm)
Total harmonic distortion		Less than 0.05% (20Hz-40kHz)	Less than 0.05% (20Hz-40kHz)	Less than 0.05% (20Hz-40kHz)	Less than 0.05% (20Hz-40kHz)	Less than 0.05% (20Hz-40kHz)	Less than 0.05% (20Hz-40kHz)
Frequency response		0, +0.5, -1.5dB 20Hz-40kHz	0, +0.5, -1.5dB 20Hz-40kHz	0, +0.5, -1.5dB 20Hz-40kHz	0, +0.5, -1.5dB 20Hz-40kHz	0, +0.5, -1.5dB 20Hz-40kHz	0, +0.5, -1.5dB 20Hz-40kHz
Dynamic range		DA: 106dB; AD+DA: 106dB	DA: 106dB; AD+DA: 106dB	DA: 106dB; AD+DA: 106dB	DA: 106dB; AD+DA: 106dB	DA: 106dB; AD+DA: 106dB	DA: 106dB; AD+DA: 106dB
Hum & noise level	Equivalent input noise	-128dBu	-128dBu	-128dBu	-128dBu	-128dBu	-128dBu
Hum & noise level	Residual output noise	-82dBu	-82dBu	-82dBu	-82dBu	-82dBu	-82dBu
Crosstalk		-80 dB	-80 dB	-80 dB	-80 dB	-80 dB	-80 dB
Power requirements		AC100-240V 50/60Hz	AC100-240V 50/60Hz	AC100-240V 50/60Hz	AC100-240V 50/60Hz	AC100-240V 50/60Hz	AC100-240V 50/60Hz
Power consumption		40W	40W	40W	40W	40W	40W
Dimensions	W	480mm; 18-7/8in	480mm; 18-7/8in	480mm; 18-7/8in	480mm; 18-7/8in	480mm; 18-7/8in	480mm; 18-7/8in
	H	44mm; 1-3/4in (1U)	44mm; 1-3/4in (1U)	44mm; 1-3/4in (1U)	44mm; 1-3/4in (1U)	44mm; 1-3/4in (1U)	44mm; 1-3/4in (1U)
	D	361mm; 14-1/4in	361mm; 14-1/4in	361mm; 14-1/4in	361mm; 14-1/4in	361mm; 14-1/4in	361mm; 14-1/4in
Net weight		4.4kg; 9.7lbs	4.4kg; 9.7lbs	4.4kg; 9.7lbs	4.5kg; 9.9lbs	4.5kg; 9.9lbs	4.5kg; 9.9lbs
Accessories		Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot	Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot	Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot	Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot	Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot	Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot

Input characteristics

Input terminal	Gain	Actual load impedance	For use with nominal	Input terminal		Connector
Input terminal	Gain	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector
CH INPUT 1-8	-60dB	3kohms	50-600 ohm Mics ^* & 600ohm Lines	-60dBu	-40dBu	Euroblock connector
CH INPUT 1-8	+10dBu	3kohms	50-600 ohm Mics ^* & 600ohm Lines	+10dBu	+30dBu	Euroblock connector

* Mic inputs can supply +48V phantom power

Output Characteristics

Output terminal	Impedance	For use with nominal	Output level		Connector
Output terminal	Impedance	For use with nominal	Nominal	Max. before clip	Connector
CH OUTPUT	75ohms	600ohm Lines	+4dBu	+24dBu	Euroblock connector

Control I/O Characteristics

Terminal	Format	Latency	Level	Connector
CobraNet ^*	CobraNet	Fixed: 1.33/2.67/5.33 msec	100Base-TX	RJ-45 x2 (Primary/Secondary)
EtherSound ^**	EtherSound	Calculable: 125μsec (SSI OUT to SSI IN)	100Base-TX	RJ-45 x2 (In/Out)

* DME8i-C, DME8o-C and DME4io-C
** DME8i-ES, DME8o-ES and DME4io-ES

Terminal		Format	Level	Connector
GPI ^*	IN	-	0-5V	Euroblock (3.5mm Pitch)
	OUT	-	TTL
	+V	-	5V
Ethernet		IEEE802.3	10Base-T/100Base-TX	RJ-45
USB		USB1.1	-	Type B
REMOTE		RS232C/RS422	RS232C/RS422	D-sub 9pin (male)

* 8IN / 4OUT
Inputs: Doesn't apply 2 wire Fader mode
Outputs: Imax/pin = 16mA
Outputs: VH = 2.5V(min.), VL = 0.6V(max.)