MGP Series Mixing Console

Where to buy

		MGP32X	MGP24X	MGP16X	MGP12X
Outline
Mixing capability	Mixing channels	32 Line Inputs (24 mono and 4 stereo)	24 Line Inputs (16 mono and 4 stereo)	16 Line Inputs (8 mono and 4 stereo)	12 Line Inputs (4 mono and 4 stereo)
	GROUP	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus
	AUX	6 AUX Sends + 2 FX Sends	6 AUX Sends + 2 FX Sends	2 AUX Sends + 2 FX Sends	2 AUX Sends + 2 FX Sends
	MATRIX	1 Matrix out	1 Matrix out	-	-
	On-board processors	FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
	Input channel functions	-	-	Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving	Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
I/O	Mic inputs	MIC: 24 (INPUTS HPF: 100Hz 12dB/oct)	MIC: 16 (INPUTS HPF: 100Hz 12dB/oct)	MIC: 10	MIC:6 (100Hz 12dB/oct)
	Phantom power	48V phantom power per channel	48V phantom power per channel	48V phantom power per channel	48V phantom power per channel
	Line inputs	LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo	LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo	LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo	LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo
	Digital I/O	USB Device, iPod / iPhone	USB Device, iPod / iPhone	USB Audio USB IN: iPod, iPhone exclusive	USB Audio USB IN: iPod, iPhone exclusive
General specifications
Total harmonic distortion		0.02% (20Hz-20kHz@ +14dBu)	0.02% (20Hz-20kHz@ +14dBu)	0.02% (20Hz-20kHz@ +14dBu)	0.02% (20Hz-20kHz@ +14dBu)
Frequency response		+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz	+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz	+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz	+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise level	Equivalent input noise	-128 dBu Equivalent Input Noise	-128 dBu Equivalent Input Noise	-128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)	-128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Hum & noise level	Residual output noise	-92 dBu Residual Output Noise	-92 dBu Residual Output Noise	-102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)	-102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Crosstalk		-74dB @ 1kHz	-74dB @ 1kHz	-74dB @ 1kHz	-74dB @ 1kHz
Power requirements		100-240V 50Hz/60Hz	100-240V 50Hz/60Hz	100-240V 50Hz/60Hz	100-240V 50Hz/60Hz
Power consumption		86W max	86W max	55W max	45W max
Dimensions	W	1,027mm (40.4")	819mm (32.2")	447mm	348mm
	H	169mm (6.7")	169mm (6.7")	143mm	143mm
	D	565mm (22.2")	565mm (22.2")	495mm	495mm
Net weight		19kg (41.9lb)	15.5kg (34.2lb)	9.0kg	7.5kg

Analog Input Specifications

Input Terminal			Actual Source Impedance	For Use With Nominal	Input Level			Connector
	PAD	GAIN	Actual Source Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector
MONO CH INPUT MGP32X: 1–24 MGP24X: 1–16	0	-60dB	3kΩ	50-600Ω Mics	-80 dBu (0.078 mV)	-60 dBu (0.775 mV)	-40 dBu (7.75 mV)	XLR-3-31 type ^2 Phone jack ^4
	0	-16dB		50-600Ω Mics	-36 dBu (12.3 mV)	-16 dBu (123 mV)	+4 dBu (1.23 V)	XLR-3-31 type ^2 Phone jack ^4
	26dB	-34dB		600Ω Lines	-54 dBu (1.55 mV)	-34 dBu (15.5 mV)	-14 dBu (155 mV)	Phone jack ^*3
	26dB	+10dB		600Ω Lines	-10 dBu (245 mV)	+10 dBu (2.45 V)	+30 dBu (24.5 V)	Phone jack ^*3
STEREO CH INPUT MGP32X: 25–32 MGP24X: 17–24		-34dB	10kΩ	600Ω Lines	-54 dBu (1.55 mV)	-34 dBu (15.5 mV)	-14 dBu (155 mV)	Phone jack ^*4 RCA Pin Jack
STEREO CH INPUT MGP32X: 25–32 MGP24X: 17–24		+10dB	10kΩ	600Ω Lines	-10 dBu (245 mV)	+10 dBu (2.45 V)	+30 dBu (24.5 V)	Phone jack ^*4 RCA Pin Jack
MONO CH INSERT INPUT MGP32X: 1–24 MGP24X: 1–16			10kΩ	600Ω Lines	-20 dBu (77.5 mV)	0 dBu (0.775 V)	+20 dBu (7.75 V)	Phone Jack ^*5
ST CH INSERT INPUT L,R			10kΩ	600Ω Lines	-20 dBu (77.5 mV)	0 dBu (0.775 V)	+20 dBu (7.75 V)	Phone Jack ^*5
TALKBACK INPUT			10kΩ	50-600Ω Mics	-66 dBu (0.389 mV)	-50 dBu (2.45 mV)	-30 dBu (24.5 mV)	XLR-3-31 type ^*6

0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.

Analog Output Specifications

Output Terminal	Actual Source Impedance	For Use With Nominal	Output Level		Connector
Output Terminal	Actual Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector
ST OUT [L,R]	75Ω	600Ω Lines	+4 dBu (1.23 V)	+24 dBu (12.3 V)	XLR3-32 type ^1 Phone jack ^4
MONO OUT	75Ω	600Ω Lines	+4 dBu (1.23 V)	+24 dBu (12.3 V)	XLR3-32 type ^*1
GROUP OUT (1-4)	150Ω	10kΩ Lines	+4 dBu (1.23 V)	+20 dBu (7.75 V)	Phone jack ^*2
AUX SEND (1-6)	75Ω	600Ω Lines	+4 dBu (1.23 V)	+24 dBu (12.3 V)	XLR3-32 type ^*1
MATRIX OUT (1, 2)	150Ω	10kΩ Lines	+4 dBu (1.23 V)	+20 dBu (7.75 V)	Phone jack ^*2
MONO CH INSERT OUT MGP32X: 1–24 MGP24X: 1–16	75Ω	10kΩ Lines	0 dBu (0.775 V)	+20 dBu (7.75 V)	Phone jack ^*3
ST CH INSERT OUT [L,R]	75Ω	10kΩ Lines	0 dBu (0.775 V)	+20 dBu (7.75 V)	Phone jack ^*3
MONITOR OUT [L,R]	150Ω	10kΩ Lines	+4 dBu (1.23 V)	+20 dBu (7.75 V)	Phone jack ^*2
PHONES OUT	150Ω	40Ω Phones	3mW	75mW	ST Phone Jack

0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)